18.02.2009, 11:01
Get new nuts and bolts!!
Be careful with removing the ball joints if you are going to re-use them
Buy MOOG
Check for rust (especially in the upper spring area)
Be careful "playing" with the spring.
Lower bolts are tight!!! WD40 or heat will get them lose
Support the car well especially when trying to get the lower bolts
Write down the shims
Get the car re aligned
Only torque (in 3 steps) when the car is on the ground
Be careful with removing the ball joints if you are going to re-use them
Buy MOOG
Check for rust (especially in the upper spring area)
Be careful "playing" with the spring.
Lower bolts are tight!!! WD40 or heat will get them lose
Support the car well especially when trying to get the lower bolts
Write down the shims
Get the car re aligned
Only torque (in 3 steps) when the car is on the ground