09.01.2008, 03:22
Auch den nochmaligen Doppel-Threadstart macht die Sache nicht besser. 
Zitat aus dem Link von V8junkie:
..."Most Q-Jets are 750 cfm carbs. This is more airflow than most small block engines can ever handle. Yet, GM used Q-Jets on everything from Overhead Cam 6-cylinder Pontiacs and Buick V-6’s, to 500 cube Caddys. How?
The secondary airvalve on the Q-Jet effectively makes the Q-Jet a variable-cfm carb. The spring windup of the airvalve combined with the bleed-off of the choke pulloff diaphragm allow the secondaries to open only as much as the engine can handle. Thus, if the engine can’t handle all of the cfm, the secondaries simply don’t open all the way..."
Gruß
Rüddy
Zitat aus dem Link von V8junkie:
..."Most Q-Jets are 750 cfm carbs. This is more airflow than most small block engines can ever handle. Yet, GM used Q-Jets on everything from Overhead Cam 6-cylinder Pontiacs and Buick V-6’s, to 500 cube Caddys. How?
The secondary airvalve on the Q-Jet effectively makes the Q-Jet a variable-cfm carb. The spring windup of the airvalve combined with the bleed-off of the choke pulloff diaphragm allow the secondaries to open only as much as the engine can handle. Thus, if the engine can’t handle all of the cfm, the secondaries simply don’t open all the way..."
Gruß
Rüddy
![[Bild: osc_logo_klein.gif]](https://www.corvetteforum.de/fotos/osc_logo_klein.gif){kind=logo}
