14.05.2015, 22:48
Zitat:
Matthias,
The 1975 C3 steering gear assembly had an input shaft that was 0.75 inch in diameter, with 30 splines interrupted by a flat. The dimension from the centerline of the shaft to the flat surface is 0.660 / 0.666 inch.
Hope that this helps,
Jim
Matthias,
The 1975 C3 steering gear assembly had an input shaft that was 0.75 inch in diameter, with 30 splines interrupted by a flat. The dimension from the centerline of the shaft to the flat surface is 0.660 / 0.666 inch.
Hope that this helps,
Jim
Grüße,
Strippe
Strippe