License Plate on Frontstoßstange (Front Bumper)

License Plate on Frontstoßstange (Front Bumper) - Druckversion

+- Corvetteforum Deutschland (https://www.corvetteforum.de)
+-- Forum: Technikforen (https://www.corvetteforum.de/forumdisplay.php?fid=1)
+--- Forum: C 5 Technikforum (https://www.corvetteforum.de/forumdisplay.php?fid=6)
+--- Thema: License Plate on Frontstoßstange (Front Bumper) (/showthread.php?tid=36250)

Seiten: 1 2

- Junkman2008 - 13.11.2008

Zitat:Original von MarkusC5
As you can see from the pics above there are several different types and sizes of plates depending on the Nr./letter combination. This in fact is a big issue here as it is a kind of competition with our stubborn authorities to get the shortest possible combination and thus the shortest possible plate. And no, in most cases they do not fit the existing holes.

If your comrade comes over with the US Military he will most probably get a special Number and license plate reserved for US Armed Forces. Then he don't have a fitment prob 'cause these plates match US plate sizes.

Wow, this is great information to know! Thanks Mark! Prost!

- JR - 13.11.2008

Hi Junkman,

as written by Mark US guys will get the smallest type of license plate which fits into front and rear gaps.

Here are two pictures with such license plates for cars from US boys based in Germany.

[Bild: IMG_6708.jpg]

Regards

JR

- MarkusC5 - 13.11.2008

Prost!

You're more than welcome, Marine Zwinkern

edit:
...and be sure, lot's of us german guys are pretty jealous about these
US Plates shown above by JR huahua

- Legend32 - 13.11.2008

Zitat:Original von Plating
@legend32
darf ich fragen, woher Du diese Nase für die C5 hast? Genau so was suche ich auch.
Phoenix aus dem Forum hier meldet sich trotz einiger Mails nicht bei mir.

Du darfst. Knutsch

Dieser Einsatz ist aber tatsächlich vom Ralf (Phoenix). Das ging bei mir eigentlich recht schnell.
Ich kann Dir nur raten ihm nochmals eine PN zu schreiben. Ich sehe ihn aber auch öfter und kann ihn dann ansprechen. Du mußt aber angeben welche Maße Dein Kennzeichen hat. Er laminiert zwei Ausführungen. Mein Kennzeichen ist 240 x 133mm

Grüße
Ralph

- Junkman2008 - 13.11.2008

Zitat:Original von JR
Hi Junkman,

as written by Mark US guys will get the smallest type of license plate which fits into front and rear gaps.

Here are two pictures with such license plates for cars from US boys based in Germany.

Regards

JR

Thanks JR! Feixen

- ZEH5didditz - 13.11.2008

Yeeah!

Hi AJ, there always is a great discussion in the forum who has the shortest sich vor Lachen auf dem Boden wälzen

(normally men talk about who has the longest....)But over here there are so called "Strassenverkehrsamt" and every one of them has diffrent rules. I was lucky to get this one! Dafür

Greets Dieter animierte C4

- Junkman2008 - 14.11.2008

Zitat:Original von ZEH5didditz
Hi AJ, there always is a great discussion in the forum who has the shortest (normally men talk about who has the longest....)But over here there are so called "Strassenverkehrsamt" and every one of them has diffrent rules. I was lucky to get this one!
Greets Dieter

Man, I think you have the shortest I've seen! sich vor Lachen auf dem Boden wälzen

Thanks for the picture! Yeeah!

- Jochen - 14.11.2008

Think twice... and have a look at my plate: Feixen